160x32 Dot Matrix LCD Screen Module for Instrumentation &
Electronic Equipment
Product Description
JXL-16032ZK-1 dot matrix graphic liquid crystal display module
(LCM), using 160x32 dot matrix liquid crystal display (LCD)
Composed with low power consumption LED backlight. It is used
together with one ST7920 master IC and one ST7921 as the driver,
each
The screen can display 2 rows of Chinese characters, each row
displays 10 standard Chinese characters, built-in 8192 16x16 dot
Chinese fonts and
126 letter symbols of 16x8 dot half width, and a 64x256 dot drawing
area (GDRAM)
And 240 points of ICON RAM, which can be mixed with text screen,
and ST7920 contains CGRAM. Provides 8
1-bit, 4-bit and serial port three microprocessor interfaces, can
be directly connected with the MCU single-chip microcomputer,
widely used in various instruments
instrumentation and electronic equipment.
Specification
| ITEM | VALUE |
| LCD mode | STN, Yellow-Green,gray,blue. |
| Display Size | 116.0(L) X 35.0(W) X 13.0(T) |
| visible area | 82.9(L) X 18.5(W) |
| display area | 76.76(L) x 15.32(W) |
| Polarizer Type | Transmissive ,Transflective |
| Display mode | Positive |
| point size | 0.44(L) x 0.44(W) |
| dot pitch | 0.48(L) x 0.48(W) |
| display Type | FSTN,positive |
| Viewing Angle | 6:00/12.00 |
| Operating Temperature | -20℃~ +70℃ |
| Storage Temperature | -30℃~80℃ |
| Driver IC | ST7920 |
| LCD Bias Ratio | 1/64duty, 1/9bias |
| backlight color | Yellow-Green /white |
| Backlight structure | unilateral/bilateral |
Company Profile
Application
Code-breaking LCD screens can be used in many fields, such as
telephones, calculators, electronic watches, digital multimeters,
and electronic game consoles. Dot-matrix LCD screens can be used in
electricity, water, gas meters; telephone billing devices,
instruments and meters, computer fuel dispensers, banking systems,
communication equipment, attendance systems, repeaters, taxation
systems, etc.
Certifications
Shipment
Handling Precautions
Dear customers:
Thank you for using the liquid crystal display module produced by
our company. Please read the following content carefully before
using it.
How to use the liquid crystal display module correctly to prevent
losses to you, if you encounter difficulties during use,
Please call our technical service department, we will provide you
with service in the shortest time.
1,Protective film
A layer of protective film is pasted on the surface of the liquid
crystal display module to prevent the display surface from being
stained during assembly.
Do not remove it until the end of distribution.
2, prevent static electricity
The LCD driver chip in the LCD module is a large-scale CMOS
circuit, which is easily broken down by static electricity.
Static breakdown is irreparable, so static electricity should be
strictly prevented during operation, assembly and use, so it is
necessary to
Notice:
1: Do not touch the driver chip of the LCD module and the gold
finger on the circuit board with your hands at will.
When in contact, be sure to wear an antistatic wristband,
antistatic finger cots/gloves, and preferably wear antistatic
overalls.
Make the human body well grounded.
2: The workbench, soldering iron and tools are well grounded.
3: Keep the humidity in the work room above RH60%.
4: The packaging materials are all anti-static materials.
3, Welding
1: The temperature of the soldering iron tip is less than 280°C.
2: The welding time is less than 3-4S.
3: Do not use acidic flux.
4: Repeat welding no more than 3 times, and each repetition needs
to be separated by 5 minutes.
5: Clean thoroughly after welding to prevent welding short circuit
and signal interference. Be careful not to spill the cleaning
solution on the
backlight on.
4, Install
Do not modify the LCD module without authorization. Such as:
changing parts, changing circuits, twisting iron frame feet,
disassembling,
Processing of PCB boards. The above behaviors cause the liquid
crystal display module not to display everything and will not be
repaired, unless approved by our company
with the consent of the
FAQ
Q1. How can I get the samples?
A: If you need samples, we can make as per your request .You should
pay the sample fee and freight. Sample lead time always be within
2-5 days.
Q2. How to order lcd?
A:Please send us your purchase order by Email, or ask us to send
you one invoice. We need to know the following information for your
order.
1)Product information-Quantity, part number
2)Delivery time required.
3)Shipping information-Company name, Street address,Phone&Fax
number,Destination sea port.
4)Forwarder's contact details if you have any in China.
Q3. How long can I expect to get the sample?
A:The samples will be ready for delivery in 5~7days.The samples
will be sent via express and arrive in 5~7 days.
Q4. When can I get the datasheet?
A: When we get your inquiry, you shall first tell us the part
number you want, then we can send you the datasheet immediately
Q5: How long can I get reply?
A: Within 24 hours. Chinese working time 9:00-18:00 Monday-Friday
online service to help you solve problems.Also reply by phone is
possible at night time and weekends.
Q6: What shall we do if we find any item missing or defective after
receiving the goods?
A: Please contact us ASAP, we will check it and offer the best
solution according to the situation.
